
Redland 35 Reverb Combo in Blonde with Purple mesh
Developed, designed, tweaked, and tested over the course of many years, the Redland Reverb Combo is a unique design aimed directly at the extended American palette of tones. It has an entirely unique tone stack that draws inspiration from sounds as varied as Dumble and Peavey. Benson sought to bring the touch sensitivity and feel of the Benson brand to preamp types that are cleaner in essence but can sound big, fat, and juicy when you dig in.
Build & Materials
- Tubes: 2 × 6L6 power tubes, 2 × 12AX7, 1 × 12DW7 reverb driver, and a 6L6GC set up as a voltage regulator for power scaling
- Output: Variable, 1 watt to 35 watts
- Controls: Volume, wattage, reverb, bass, and treble
- Construction: Point-to-point on terminal strips (no circuit, eyelet or turret board)
- Transformers: Custom Soursound, including a wax-potted output transformer
- Capacitors: Jupiter Yellow
- Cabinet: Dovetailed pine
- Covering: Blonde
- Grille Cloth: Purple mesh
- Speaker: Benson Custom ceramic, 1×12 combo
- Speaker Outputs: 1 × 8 ohm, 1 × 16 ohm
- Fuse: 3A Slo Blo
Size & Feel
- 35W 1×12 Combo: 23.5" W × 17.5" H × 10" D
- Weight: 44 lbs
The Redland EQ The volume, wattage, and reverb controls are pretty standard Benson fare. The bass and treble controls are where the rubber meets the road, so to speak.
- Bass moves a sizable scoop up and down the frequency spectrum, starting at 100 Hz and ending around 1 kHz. It essentially cuts bass at the lowest setting and ends up cutting into the treble at the highest setting. It might seem strange, and it is, but the results need to be experienced to be properly understood as very versatile in tandem with the special treble control, more so than your average treble-middle-bass tone stack. You can pick the frequency points to feature and, conversely, what to cut. It just ends up sounding very big.
- Treble is a treble roll-off, but instead of the typical 6 dB per octave slope found in most guitar amps, it's 12 dB per octave, much steeper, with EQ points selected with great care for guitar.
This is the heart of the Redland: the Redland EQ. A small amount of global negative feedback slows the response envelope of the amp, bringing some extra fattness to the feel and response.
Sound Profile The Redland 35 comes with 6L6 tubes and can go from crystalline clean and beautiful to midrangey and aggressive with a twist of the knob. The tone of all Benson amps is defined by beautiful, ringing clean tones that transition into aggressive distortion. Benson amps don't sound like a Fender, a Marshall, or a Vox. Rather, they take the best characteristics of all of them to create their own powerful, musical sonic signature, adding incredible touch sensitivity and some of the best edge-of-breakup tones in the business.
The Details
- Handmade in Portland, OR by Benson Amps, led by Chris Benson
- Built in 2026
- 35W 1×12 combo with Benson Custom ceramic speaker
In stock now at Wood & Wire.
Choose options
